What is a dock leveler?

A dock leveler is the steel ramp built into a loading dock that bridges the gap between the warehouse floor and the back of a truck, so forklifts and pallet jacks can drive straight in and out.

Typical prices: service call $150–$400 · most door repairs $200–$1,500 · dock leveler repair $500–$3,000 · new dock leveler $5,000–$15,000 installed. See the cost guide.

Request service
  • Free referral service: independent local companies pay us a marketing fee, not you
  • Independent local companies that work on commercial doors and docks
  • You get the quote directly from the company doing the work

Request service

What it does

Trailer beds sit at different heights: a low container, a standard trailer, a tall refrigerated trailer. They also squat lower as they're loaded. A leveler adjusts up and down to match each one and covers the gap between the dock and the trailer, so loads cross smoothly and safely.

How it works

  1. A trailer backs up to the dock and is secured with a vehicle restraint or wheel chocks.
  2. The dock door opens and the operator raises the leveler, by push button on hydraulic and air-powered models or with a pull chain on mechanical ones.
  3. The hinged lip at the front swings out.
  4. The leveler lowers until the lip rests on the trailer bed, forming a ramp.
  5. When loading is done, the leveler is raised, the lip folds back, and it returns to its stored position level with the dock floor.

The main types

  • Hydraulic: push button, pump and cylinders. The most common at busy docks.
  • Mechanical: pull chain and springs. Lower cost, more physical effort and spring wear.
  • Air-powered: an air bag lifts the deck. Push button without hydraulic fluid.
  • Edge-of-dock: a short plate on the face of the dock for small height differences; no pit.
  • Vertical-storing: stands upright when not in use so the dock door seals tightly; common in cold storage and food plants.

Parts worth knowing

Deck (the main plate), lip (the hinged front plate), hinges, pit (the concrete recess it sits in), hold-down or cylinders (control how it moves), toe guards (side plates that stop feet getting caught), and the maintenance strut (props the deck up safely for service).

Signs it needs attention

It won't raise, drifts down, the lip won't extend, there's oil in the pit, or it bounces or clunks under a forklift. Our guide to a dock leveler that isn't working covers causes and safe checks, and dock leveler repair connects you with a local company.

Need a door or dock fixed?

Use the form at the top of this page.

Request service